Guide

Loan for factory setup: what it costs to get running and which funding is quickest

Splitting a factory or workshop start-up into four cost buckets, and matching each to the quickest sensible funding route.

Updated 19 November 2026 · Fast Loans Australia editorial team

See if you qualify →60 seconds · no credit check to enquire

Quick answer

A loan for factory setup works best when you split the start-up into four buckets: machinery, fit-out, raw materials and wages. Machinery suits equipment finance or a property-secured loan, while fit-out, materials and wages need flexible cash. With property as security, $20k to $250k is possible same day and up to $5m within 24 to 48 hours. Council and workplace safety approvals are what most often delay opening.

Key points

  • Split the budget into machinery, fit-out, materials and wages, because each suits a different kind of funding
  • Machinery can be financed against the machine itself; fit-out, stock and wages usually can't
  • The ATO says the instant asset write-off is permanently $20,000 per asset from 1 July 2026 for businesses under $10m turnover
  • Approvals (change of use, building certification, registered plant) often set the opening date, not the money
  • A start-up has a thinner paper trail than an established manufacturer, so property security often moves faster
  • Fund the first 90 days of materials and wages, not just the machines

Setting up a factory or workshop is a different money problem to running one. Before the first product leaves the door you’ve paid for machines, a shed that’s fit to work in, a pile of raw materials and a crew, and none of it earns a cent until customers pay you weeks later. The trick is not to find one big loan for “the factory”. It’s to split the start-up into pieces and match each piece to the funding that suits it, so you aren’t waiting on the slowest one.

This guide breaks a factory setup into four cost buckets, shows which route can be quickest for each, and flags the approvals that tend to hold up opening day.

What does a factory setup actually cost?

A factory setup cost is the sum of four buckets: machinery, fit-out, raw materials and wages until you’re paid. Most owners budget the first one carefully and underestimate the last two. The machines are the visible spend, but the cash drain that hurts is the first three months of running them.

Here is an illustration only, for a small metal fabrication workshop. These are made-up round numbers to show the shape of the spend, not quotes or a benchmark.

Bucket What it covers Example share of the budget
Machinery Press brake, welders, saws, compressor About 40%
Fit-out Power upgrade, benches, extraction, racking, safety signage About 20%
Raw materials Steel, consumables, the first few orders’ worth About 15%
Wages and running costs Crew, rent, insurance, utilities until invoices are paid About 25%

Your split will differ if you make food, timber products or plastics, so replace the percentages with written quotes. The point is that only one of those four buckets is something a lender can easily take as security.

Which funding suits machinery?

Machinery suits equipment finance or a property-secured loan. Equipment finance is secured by the machine itself, so it can work for a single purchase from a dealer, though the seller’s paperwork sets how quickly it moves. Property-secured loans don’t depend on the machine and can be faster for a package of several purchases.

  • Equipment finance: good for one or two big machines from an established dealer. The clock depends on invoices, serial numbers and the seller, and our stage-by-stage equipment finance clock shows where the days go.
  • Property-secured loan: one facility, secured against property you own, can cover machines, fit-out and working capital together. Per our secured loan page, $20k to $250k is possible same day and up to $5m within 24 to 48 hours, once the documents are in order.
  • Unsecured loan: for an established trading business adding a second line, typically $5k to $500k, sized on turnover and bank statements.

If you’re buying second-hand machinery at an auction or clearing sale, the seller’s payment deadline will decide your route faster than any preference. See our equipment finance page for how that works.

Does the instant asset write-off change the maths?

It can improve the after-tax cost of machinery. The ATO states that the instant asset write-off is permanently increased to $20,000 from 1 July 2026 for businesses with aggregated turnover under $10m. That applies per asset that’s first used or installed ready for use on or after that date. A $60,000 machine doesn’t qualify for the immediate write-off, though it can go into the small business pool, so check the treatment with your accountant before you sign.

The practical point: the write-off is a tax outcome, not cash. It doesn’t pay the invoice this week.

What about fit-out, materials and wages?

Fit-out, raw materials and wages usually can’t be financed against an asset, so they need flexible cash: an unsecured loan, a line of credit, or a property-secured facility that covers everything. A lender can’t repossess concrete, wiring or the steel you’ve already cut.

This is where owners get caught. They finance the machines neatly, then discover that the power upgrade, extraction and the first two payrolls have no home. Add these to the same funding conversation from the start, not as an afterthought three weeks before opening. Our fit-out and renovation page covers how that spend is usually funded.

For the working capital bucket, use your own terms. If customers pay on 30 days and your materials need paying on delivery, you’re funding at least a month of costs before any cash arrives. The cash gap calculator turns that into a figure you can borrow against.

Setting up and want to see which mix suits your numbers? Check your options before you commit to a lease or order a machine.

Which approvals delay opening day?

Approvals are usually what sets the opening date. Council consent for the use of the building, certification for the fit-out and, for some equipment, plant registration can each take longer than the money does.

Check these early, because they run on the regulator’s timetable, not yours:

  1. Change of use. Councils generally expect approval before a building starts being used for a new purpose. A council such as Shoalhaven explains that the pathway can be a development application or, for some industrial and business uses, a complying development certificate. Rules differ by state and council, so ring yours before signing a lease.
  2. Building certification. Fit-out work may need a construction certificate or building permit first.
  3. Occupation certificate. Councils such as Byron describe it as the approval that lets you use or occupy the building after a change of use with consent.
  4. Registered plant. Under the model workplace safety laws, Safe Work Australia says certain plant designs and items need registration, and your state regulator runs it. Check whether any machine you’ve ordered, such as a pressure vessel or a hoist, is on the list before it arrives.

A good habit is to ask the landlord, the council and the machinery supplier the same question: “What has to be in place before I can switch on?” Then fund the lease and orders in line with the answers. Paying rent on an empty shed for six weeks is its own cash drain.

What do lenders want to see for a start-up factory?

For a start-up factory, lenders mostly want evidence you can repay and something solid to secure against. With little trading history, the plan and the security carry more weight than turnover.

Have these ready:

  • Written quotes for machines and the fit-out
  • A simple 12-month cash flow forecast, with your first orders or customer commitments
  • Property details if you’re offering security, including what’s owed on it
  • Your ID, ABN and recent business and personal bank statements
  • The lease or contract for the premises

An established manufacturer adding a second line has an easier path: 6 to 12 months of bank statements and BAS often matter most. Our document checklist lists what speeds a file up and what slows it down. Our manufacturing page explains how materials-to-cash cycles shape the whole picture.

What’s the quickest sensible order of steps?

Work in this order, because each step feeds the next.

  1. Get the approvals question answered before signing anything you can’t exit.
  2. Collect written quotes for the machines and the fit-out.
  3. Total your first 90 days of materials, wages and rent, not just the purchases.
  4. Decide which bucket goes on which funding, and be honest about the bits with no asset behind them.
  5. Start the funding conversation while approvals are in progress, so the money is ready when the green light comes.

Done in that order, money rarely turns out to be the bottleneck. Done the other way round, it’s the thing everyone’s waiting on.

Ready to get the factory switched on?

Starting a manufacturing business is a big step, and the owners who get there fastest are the ones who’ve lined up the money alongside the approvals rather than after them. If you’d like someone to look at your machinery list, your premises and what you can offer as security, we’ll work out which structure fits.

Enquiring takes about 60 seconds, and there’s no credit check when you first enquire, so asking doesn’t touch your credit file. We don’t send your details to a pile of lenders, so your phone won’t light up with strangers. A real person looks at your individual situation and calls you. Please fill the form in accurately, because it helps us match the right option first time.

See if you qualify →

Frequently asked questions

How much does it cost to set up a small factory or workshop?

It varies hugely by what you make, so build your own number from four buckets: machinery, fit-out, raw materials and wages until the first invoices are paid. As an illustration only, a small fabrication shop might spend a large share of its budget on a handful of machines, then find the cash drain is in the first three months of steel and wages. Get written quotes for every machine before you apply.

Can I get a business loan to start a manufacturing business?

Yes, setting up a manufacturing business is a normal business purpose. A start-up has little trading history, so a property-secured loan (from $20k to $5m) is often the route that works. Established manufacturers can also look at unsecured options, typically $5k to $500k, sized on turnover and bank statements.

What is the quickest way to fund factory machinery?

If you own property, a secured loan can be quickest, with $20k to $250k possible same day and up to $5m within 24 to 48 hours. For a single machine bought from a dealer, equipment finance is a common alternative, but the seller's paperwork sets its clock. Speeds are possible, not promised.

Does the instant asset write-off apply to factory machinery?

It can. The ATO says the instant asset write-off is permanently $20,000 per asset from 1 July 2026 for small businesses with aggregated turnover under $10m, for assets first used or installed ready for use on or after that date. Machines costing more go through the small business pool instead. Ask your accountant how it applies to each machine.

What approvals delay a new factory opening?

Typically council approval for the use of the building (a development application or a complying development certificate), certification for any fit-out, an occupation certificate, and registration for certain high-risk plant under your state's workplace safety rules. Which ones apply depends on the council and the building's last lawful use.

Do I need to own property to borrow for a factory setup?

No. Unsecured options exist for trading businesses. But a new start-up usually lacks the turnover history those are sized on, which is why owner-occupied or investment property often features in start-up funding.

How much working capital should I keep for the first few months?

Enough to carry raw materials, wages and rent until your first customers pay. Work it out from your own payment terms: if customers pay at 30 days, you are funding at least a month of costs before any cash comes in. Our cash gap calculator can put a number on it.

See what your business could qualify for

One short enquiry, no credit check when you first enquire, and a real person who calls you back with options that fit.

No credit check to enquire

No spray and pray

A real person on it